Ooh la la! DIY Gold Chandelier

Ever see all those fancy decorations and then when trying to find it, you can never find what you are looking for?  Ya, that's me...always...I have these insane ideas for DIY projects and decorations and sometimes the ambition to complete them.  Luckily, I have a crazy enough family that is willing to humor me and be ambitious with me!

So this is where the golden chandelier was created, inspired by the Great Gatsby for a Roaring 20's themed party.  When trying to find one to buy, they were all too small and would get lost in the size of the room so we created two! 

What you need (this will make 2): 

• 1- 12' fringe curtain such as this one or you can use 2-fringe table skirts (just make sure the length is what you are looking for as well as long enough to cover your hula hoop!)
• 2 hula hoops (the size you would like your chandeliers to be)
• spray paint similar to the color of your fringe curtain 
• packing tape/masking tape
• thin string/fishing line
• hot glue gun
• scissors
• a large area to lay out the curtain on
• 2 people! This will definitely make this a lot easier

1. Spray paint your hula hoops. You only need to spray paint the side that is facing down, but can do both sides if you'd prefer.  
2. If you are using table skirts, skip to step 6.  Lay out the curtain on the floor. You will want it as flat as possible with as few strands overlapping as possible.  This will make the next step easier. 
3. Using your second person, pull a piece of packing tape that is the width of your curtain (12 feet) and half way down the length of the curtain (4 feet).  The metallic fringe was full of static so we placed the tape down on both sides at the same time, then pushed the fringe to the tape.
4. Next, cut along the TOP part of the taped area along the width of the curtain (12 feet).  You have now made 2 long strips of fringed curtain that are 4 feet long.  
5. Flip the curtain over and put another strip in the same spot as the tape on the other side.  
6. Take one strip and hot glue it to the hula hoop. Hot glue small amounts at a time so the glue doesn't dry before you are able to get the curtain attached.  Be careful, it gets hot!!!
7. Once your hula hoop has fringe all around, cut the excess off.
8. Repeat steps 6 & 7 for your second hula hoop.  
9. Attach 3 pieces of string to the hula hoop and loop together.  Hang using string or fishing line.  I hung this on a fan, but you can hang from anywhere on a ceiling.  Command hooks work great! 
10. Trim any crooked fringe or if it is hanging too low.  
11. Voila! You have yourself two chandeliers!

Additional Thoughts: If you have the time, you can also make a second smaller hula hoop fringe to hang underneath it to add depth.  We ran out of time, but it could have been a nice touch.  

Here is a picture tutorial to help with these directions! Good luck! :) 

1. Spray paint your hula hoops. You only need to spray paint the side that is facing down, but can do both sides if you'd prefer.  

2.  If you are using table skirts, skip to step 6.  Lay out the curtain on the floor. You will want it as flat as possible with as few strands overlapping as possible.  This will make the next step easier.

3. Using your second person, pull a piece of packing tape that is the width of your curtain (12 feet) and half way down the length of the curtain (4 feet).  The metallic fringe was full of static so we placed the tape down on both sides at the same time, then pushed the fringe to the tape.

4. Next, cut along the TOP part of the taped area along the width of the curtain (12 feet).  You have now made 2 long strips of fringed curtain that are 4 feet long.  

5.  Flip the curtain over and put another strip in the same spot as the tape on the other side. 

 
6. Take one strip and hot glue it to the hula hoop, wrapping it around the top of the hula hoop. Hot glue small amounts at a time so the glue doesn't dry before you are able to get the curtain attached.  Be careful, it gets hot!!!

7. Once your hula hoop has fringe all around, cut the excess off.

8.  Repeat steps 6 & 7 for your second hula hoop.

9,  Attach 3 pieces of string to the hula hoop and loop together.  Hang using string or fishing line.  I hung this on a fan, but you can hang from anywhere on a ceiling.  Command hooks work great! 

10,  Trim any crooked fringe or if it is hanging too low.  

Voila! You have yourself two chandeliers!